Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZNW004X
Title: DOOR / HATCH: HOOD SUPPORT: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the LH side.

1. REMOVE HOOD SUPPORT ASSEMBLY

(a) Using a screwdriver with its tip wrapped in protective tape, remove the hood support assembly while releasing the 2 clips.

NOTICE:

  • Do not touch the rod of the stay with gloves, to avoid fibers from adhering.
  • When foreign matter adheres to the rod, it prevents the rod from moving smoothly and reduces its holding power.

HINT:

Support the hood by hand while removing the hood support.

2. REMOVE NO. 1 HOOD SUPPORT BOLT

(a) Remove the hood support bolt.